The Scanclimber Double-Decker expansion transforms the standard Mast Climbing Work Platform to a dynamically aligning platform that makes it easier and quicker to perform surface work on rounded, curved and arched surfaces. It moves up and down naturally, like any other platform but it also moves horizontally in two levels, with several outreaching decks. Not a standard product.

All Reach Extension (ARE) provides access from Mast Climbing Work Platforms (MCWP) into complex structures. ARE is an out-reaching mast climber extension that can move along the platform, glide in and out from the main platform and can slew 90 degrees. All Reach Extension is designed for places where you have to reach uneven facades and the most complex structures.

The Scanclimber Sliding Deck Extension (SDE) transforms a Standard Mast Climbing Work Platform in to a dynamically aligning platform that makes it easier and quicker to perform surface work on complex building facades. It moves up and down, like any other platform, but it also moves horizontally with several outreaching decks.

The electrically operated sliding deck extension can be installed on the platforms section 0,8 m and 1,6 m. The movements of the electrically operated SDE are controlled by motorized drive units using pendant remote control or manually. Available extensions are: 0.2-1.6 x 1.6 m, 0,2-1,6 x 3,2 m and 0,2-1,6 x 4,8 m.

The manually operated sliding deck extension can be installed on the platforms section 0,8 m and 1,6 m. The movements of the manual operated SDE are controlled by by using handle unit that drives chain wheel. Available extensions are: 0,2-1,6 x 0.8 m, 0,2-1,6 x 1,2 m, 0.2-1.6 x 1.6 m, 0,2-1,6 x 2,0 m and, 0,2-1,6 x 3,2 m

The Mast Climber Top Crane (MCTC) is an add-on option for Scanclimber’s mast climbing work platforms (MCWP). The MCTC is mounted on the top of the MCWP’s mast and it can be slewed 360 degrees around the mast. It can be used for lifting material from ground to platform, and from platform to the facade. The MCTC is compatible with most of the existing MCWPs from Scanclimber’s product catalogue.

The Scanclimber^® Counter Balanced Extension (CBE) is a Mast Climbing Work Platform (MCWP) expansion which is available on special order for SC 4000, SC5000, SC6000, SC8000 and SC10000 MCWP products. It is fully compatible with the existing Scanclimber^® mast climbers and standard platform sections.

Scanclimber’s glide rail is an additional equipment meant for the Mast Climbing Work Platform which helps to move and deliver façade elements on the platform at any given height. The Glide Rail has a simple design and it is easy to install. The add-on is compatible with all the middle to high payload range capacity MCWPs.

Heavy Duty (HD) Chassis with new HD mast allows using Mast Climbing Work Platforms up to 30 meters height freestanding. Not only that but using the Chassis with outriggers, the mast climber can be used up to 55 meters height with only attaching the top anchor with a mast. When it comes to compatibility, the HD chassis can be used with the whole range of Mast Climbing Work Platforms i.e. SC5000, SC6000, SC8000 and SC10000.

A cable guide system controls the power supply cable to run up and down with the hoist cage. In low mast installations the cable drum on the ground station is enough to keep the cable in order. With higher masts, the cable trolley ensures smooth movement and prevents damaging of the cable.

Scanclimber hoists can be equipped with an optional automatic rack lubrication system. The automatic lubrication system consists of a grease pump, a control unit, a grease pipe.

The logic control system stops the cage automatically on a desired landing according to the call. The landings are programmed in the control system’s memory so that a certain number of impulses is equivalent to a landing. The cage is stopped on the land-ing by the program.

The pipe scaffolding consists of three verti-cal pipes, two of which are parallel to the mast pipes and the third one is placed to the side in relation to the first two. The pipes are joined together using the so called pipe couplings, which are pressed to the pipe’s inner surface.

Available wide variety of mast anchorings.

Landing level acces is normally arranged with the B door. To make the access and hoist erecting easier, the door can be equipped with a manually or hydraulically operated ramp. The length of the standard ramp is 700 mm.

Falcon's H48 construction hoists full height landing doors are compatible and interchangeable with all H48 hoist models. The gates and doors are reliable, flexible and can be adjusted to different kinds of structural conditions. The full height doors height is 2.0 m and are equipped with an interlocking system and meet the requirements of the current Machinery Directive and Personnel and Material hoist standard (EN12159).

Falcon's H48 series construction hoists double-leaf landing gate is compatible and interchangeable with all H48 hoist models. The gates and doors are reliable, flexible and can be adjusted to different kinds of structural conditions. The gate is 1.1 m high and equipped with an interlocking system and meet the requirements of the current Machinery Directive and Personnel and Material hoist standard (EN12159).

Falcon's H48 construction hoists landing gates and doors are compatible and interchangeable with all H48 hoist models. The gates and doors are reliable, flexible and can be adjusted to different kinds of structural conditions. The gate is 1.1 m high and equipped with an interlocking system and meet the requirements of the current Machinery Directive and Personnel and Material hoist standard (EN12159